Table of Contents
Advertisement
OSD POSITION
UP
DOWN
LEFT
RIGHT
INFORMATION OSD
MONITOR INFORMATION
OSD TRANSPARENCY
OSD ROTATION
LANDSCAPE
PORTRAIT
INPUT NAME
CLOSED CAPTION
VIDEO1, VIDEO2, S-VIDEO inputs only
RESET
MULTI DISPLAY
CONTROL ID
IR CONTROL
NORMAL
PRIMARY
SECONDARY
IR LOCK SETTINGS
MODE SELECT
UNLOCK
ALL LOCK
CUSTOM LOCK
*1: This function depends on which option board you use.
*2: This function depends on Terminal setting.
Determines the location where the OSD appears on the screen.
Selects whether the information OSD is displayed or not. The information OSD will be displayed
when the input signal or source changes. The information OSD will also give a warning when
there is no-signal or the signal is out-of range.
An interval between 3 to 10 seconds for the Information OSD to appear is available.
Indicates the model and serial number of your monitor.
CARBON SAVINGS: Display the estimated carbon saving information in kg-CO2. The carbon
footprint factor in the carbon saving calculation is based on the OECD (2008 Edition).
CARBON USAGE: Display the estimated carbon usage information in kg-CO2. This is the
arithmetic estimation, not actual measurement value. This estimation is based without any
options.
Set the transparency of the OSD.
Determines the OSD display direction between landscape and portrait.
Display the OSD with landscape mode.
Display the OSD with portrait mode.
You can create a name for the INPUT currently being used.
Max: 8 characters, including Space, A-Z, 0-9, and some symbols.
Activates closed captioning.
Resets the following settings within the OSD menu back to factory setting:
MENU DISPLAY TIME, OSD POSITION, INFORMATION OSD, OSD TRANSPARENCY,
CLOSED CAPTION.
Sets the monitor ID number from 1-100 and group ID from A-J. When "YES" is selected in
"AUTO ID", monitor ID numbers are set automatically in all monitors which follow in the chain with
RS-232C.
NOTE: Group ID is made of multiple selections.
Selects the mode of the monitor for use with the infra-red remote control when using the
RS-232C daisy chain.
The monitor will be controlled normally using the wireless remote control.
Choose "PRIMARY" for the fi rst monitor within an RS-232C daisy chain.
Choose "SECONDARY" for all subsequent monitors within an RS-232C daisy chain.
Prevents the monitor from being controlled by the wireless remote control.
When ACTIVATE is selected, all the settings are activated.
NOTE: IR LOCK SETTINGS is a function intended only to the wireless remote control buttons.
This function does not lock out access to all buttons at the back of the monitor. To return to
normal operation, press the "DISPLAY" button on the remote control for 5 seconds.
Selects the mode UNLOCK, ALL LOCK or CUSTOM LOCK.
All buttons on the remote control are available for normal operations.
Locks all remote control buttons.
Selects which buttons to be locked from POWER, VOLUME, and INPUT button.
Except for CUSTOM LOCK settings, other buttons on the remote control are locked.
POWER:
When LOCK is selected, POWER button is locked.
VOLUME: When UNLOCK is selected, sets minimum and maximum volume between VOL.0 to
VOL.100.
VOLUME (+) button and VOLUME (-) buttons are only available from the minimum
volume to the maximum volume you set.
When LOCK is selected, VOLUME (+) button and VOLUME (-) buttons are locked.
INPUT:
When UNLOCK is selected, choose up to three buttons from DVI, DisplayPort, VGA,
HDMI, DVD/HD*
2
, VIDEO*
The unselected buttons are locked. When LOCK is selected, all INPUT buttons are
locked.
2
2
1
, S-VIDEO*
, OPTION*
which you prefer to be unlocked.
English-26
X = 128, Y = 225
ON, 3 Sec.
-
ON
LANDSCAPE
-
OFF
-
1
NORMAL
UNLOCK
Advertisement
Table of Contents
