Fitting The Solar-Divicon; Fitting The Thermal Insulation Mat At The Top - Viessmann Vitocell 100-B Installation Instructions For Contractors

Fitting the Solar-Divicon and thermal insulation
(cont.)

Fitting the Solar-Divicon

The example shows the installation of a Solar-Divicon
SD1 with Vitosolic. The Solar-Divicon SDIO/SM1A is
installed in the same way.
3.
1.
2.
Fig. 10
1. Position Solar-Divicon on bracket plate. 3. Secure Solar-Divicon with M8 nuts. Torque: 20 Nm
2. Connect solar return. Insert gasket.
Tighten the nut with a torque of 50 Nm.

Fitting the thermal insulation mat at the top

Fig. 11
12