Installing The Collector (Positioning At 90°) - Viessmann Vitosol 222-T Installation And Service Instructions For Contractors

Installing the collector (positioning at 90°)
!
Please note
Do not damage the vacuum
tubes.
Do not position the cardboard
packaging vertically, do not sub-
ject it to impacts and do not walk
on it.
Install the collector with a fall (min. 2°),
i.e. the header casing must be in a higher
position.
A B
170
A Balcony outside wall
B Supplied template
Vacuum tubes
8
12
Note
On balconies with a protruding floor
plate, observe the following clearances
between the floor plate and the lower
holes:
■ 8 vacuum tubes: min. 200 mm
■ 12 vacuum tubes: min. 360 mm
1790
C Supplied template moved to the
x in mm
260
420
Installation sequence
side
C
7