STEP III – ATTACHING THE TYRE AND TAIL LIGHT FRAME
•
Attach the wheel axis (#2) to chassis (#1), using hex bolt M12x70 (#65), flat washer 12 (#57),
lock nut M12 (#58).
•
On the wheel (#3) to wheel axis (#2), lock the hex slotted nut M24x1.5 (#60) in place using
the split pin 4x45 (#59). Install the dust cap (#4) on the end using rubber hammer.
•
Attach the fender (#47) to chassis (#1), using hex bolt M8x20 (#67), flat washer 8 (#68),
and lock nut M8 (#69).
15