Hyundai HYCH15100TE Instruction Manual page 10

Petrol wood chipper
Table of Contents

Advertisement

ELECTRICAL SAFETY (WHERE APPLIACABLE)
DANGER! ELECTRICITY CAN KILL - NEVER WORK ON LIVE/ENERGISED
EQUIPMENT.
Prior to carrying out any maintenance work you MUST identify electrical isolation methods and isolate all
electrical supplies.
Prior to use and with all electrical supplies isolated, you MUST check all electrical cables, plugs and
connectors for the following;
- Are intact and have no signs of damage, to include but not limited to bare wires, chaffing, cuts and
loose wiring.
- If there are any signs of damage, the damaged item MUST be taken out of service until the damage
has been repaired by an electrically competent person.
- All trailing cables should be routed so as not to cause any kind of trip hazard.
- NEVER work on or near electricity with wet hands, wet clothing and wet gloves.
VIBRATIONS (WHERE APPLICABLE)
Prolonged use of hand held (operated) machines will cause the user to feel the effects of/from vibrations.
These vibrations can lead to white finger (Raynaud's phenomenon) or carpal tunnel syndrome. This
condition reduces the ability of the hand to feel and regulate temperature, causing numbness and heat
sensations and may cause nerve damage and circulatory tissue death.
Not all factors that lead to white finger disease are known, but cold weather, smoking and other diseases
that affect blood vessels and blood circulation as well as large and long-lasting impact of shocks are
considered factors in the formation of white finger. Note the following to reduce the risk of white finger
and carpal tunnel syndrome;
- Wear gloves and keep your hands warm.
- Take regular breaks.
All of the above precautions may help reduce the risk of white finger disease but not rule out the carpal
tunnel syndrome. Long-term and regular users are therefore recommended to observe the condition of
your hands and fingers. Seek medical attention immediately if any of the above symptoms should occur.
NOISE (WHERE APPLICABLE)
The operating noise of the machine can damage your hearing. When wearing protection such as
earplugs or ear defenders to protect your hearing. Long-term and regular users are advised to have
hearing checked regularly. Be especially vigilant and cautious when wearing ear protection because
your ability to hear alarm warnings will be reduced.
Noise emissions for this equipment is unavoidable. Carry out noisy work at approved times and for certain
periods. Limit the working time to a minimum. For your personal protection and protection of people
working nearby it is also advisable for them to wear hearing protection.
See Certificate of Conformity section for Outdoor Noise declaration of conformity.
INTENDED USE
The HYCH15100TE is a petrol powered wood chipper from HYUNDAI intended for wood chipping of
branches and sticks for personal use in your garden or estate. Only to be towed when off-road. The
HYCH15100TE is powered by a 420cc petrol engine. The wood chipper is manufactured according to
the latest safety requirements. Every precaution is only effective when it is followed exactly.
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents