Hyundai HYCH15100TE Instruction Manual page 16

WOOD CHIPPER ASSEMBLY
Set the shipping crate on a solid flat surface and carefully remove the lid. Use two people and
take all parts out of the crate and inspect the components to ensure there are no missing pieces
before starting to assemble the log splitter
STEP I – ASSEMBLING THE FEEDING HOPPER
•
Assemble feeding hopper
flat washer 8 (#68), and
•
seal (#19)
Put the rubber
STEP II – ATTACHING THE HITCH ARMS AND TRALIER HITCH ASSEMBLY
•
Attach the coupler
and lock nut M12 (#58).
•
Attach the tow bar (#50) to chassis (#1), using hex bolt M12x70 (#65), flat washer 12 (#57),
and lock nut M12 (#58).
•
Attach the jockey wheel (#52) to tow bar (#50), using hex bolt M10x60 (#53), flat washer 12
(#57) and flat washer 10 (#54).
cutter disk base
(#18) to
lock nut M8 (#69).
between the feeding hopper
(#51) to tow bar (#50), using hex bolt M12x80 (#56), flat washer 12 (#57),
following
steps 1 through 3.
(#6) using for hex bolt M8x25 (#77),
(#18) to
14
cutter disk base
(#6).