AEG FSK32610Z User Manual page 21

Problem and alarm code
The level of water inside the appliance
is too high.
• The indicator
intermittently.
• Acoustic signal sounds 15 times in‐
termittently.
The appliance stops and starts more
times during operation.
The programme lasts too long.
Small leak from the appliance door.
The appliance door is difficult to close. •
The appliance door opens during the
wash cycle.
Rattling/knocking sounds from inside
the appliance.
The appliance trips the circuit-beaker.
Refer to "Before first use",
"Daily use", or "Hints and
tips" for other possible
causes.
Once you have checked the appliance,
deactivate and activate the appliance. If
the problem occurs again, contact an
Authorised Service Centre.
Possible cause and solution
•
•
•
flashes 15 times
•
•
•
•
•
•
•
•
•
•
•
Switch the appliance off and on.
Make sure that the filters are clean.
Make sure that the outlet hose is installed at
the right height above the floor. Refer to the in‐
stallation instructions.
It is normal. It provides optimal cleaning results
and energy savings.
If the delayed start option is set, cancel the de‐
lay setting or wait for the end of the count‐
down.
Refer to the consumption values table in the
chapter "Programmes".
The appliance is not levelled. Loosen or tight‐
en the adjustable feet (if applicable).
The appliance door is not centred on the tub.
Adjust the rear foot (if applicable).
The appliance is not levelled. Loosen or tight‐
en the adjustable feet (if applicable).
Parts of the tableware are protruding from the
baskets.
The AirDry function is activated. You can de‐
activate the function. Refer to "Settings".
The tableware is not properly arranged in the
baskets. Refer to basket loading leaflet.
Make sure that the spray arms can rotate free‐
ly.
The amperage is insufficient to supply simulta‐
neously all the appliances in use. Check the
socket amperage and the capacity of the me‐
ter or turn off one of the appliances in use.
Internal electrical fault of the appliance. Con‐
tact an Authorised Service Centre.
For alarm codes not described in the
table, contact an Authorised Service
Centre.
WARNING!
We do not recommend using
the appliance until the
problem has been
completely fixed. Unplug the
appliance and do not plug it
in again until you are certain
that it operates correctly.
ENGLISH 21