Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for AEG FSK32610Z
Summary of Contents for AEG FSK32610Z
- Page 1 FSK32610Z User Manual Dishwasher USER MANUAL...
-
Page 2: Table Of Contents
12. TECHNICAL INFORMATION................23 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. - Page 3 ENGLISH of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.1 Children and vulnerable people safety This appliance can be used by children aged from 8 • years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a...
-
Page 4: Safety Instructions
If the supply cord is damaged, it must be replaced by • the manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard. Put the cutlery in the cutlery basket with the sharp •... - Page 5 ENGLISH 2.4 Use be replaced, this must be carried out by our Authorised Service Centre. • Do not put flammable products or • Connect the mains plug to the mains items that are wet with flammable socket only at the end of the products in, near or on the appliance.
-
Page 6: Product Description
2.7 Disposal displays, pressure switches,... -
Page 7: Control Panel
ENGLISH Upper basket 4. CONTROL PANEL On/off button / Reset button Programme button Programme indicators Delay button Indicators 4.1 Indicators Indicator Description Drying phase indicator. It is on when you select a programme with the dry‐ ing phase. It flashes when the drying phase operates. Salt indicator. - Page 8 Programme Type of load Degree of soil Programme phases • Crockery • Normal to heavy • Prewash • Cutlery • Dried-on • Wash 60 °C • Pots • Intermediate rinse • Pans • Final rinse 60 °C • Drying •...
-
Page 9: Settings
ENGLISH info.test@dishwasher-production.com In your request, include the product number code (PNC) from the rating plate. For any other questions regarding your dishwasher, refer to the service book provided with your appliance. 6. SETTINGS 6.1 Programme selection Press and hold the programme button until the appliance is in programme mode and user mode selection mode. - Page 10 German de‐ French de‐ mmol/l Clarke de‐ Water softener lev‐ grees (°dH) grees (°fH) grees 15 - 18 26 - 32 2.6 - 3.2 18 - 22 11 - 14 19 - 25 1.9 - 2.5 13 - 17...
- Page 11 ENGLISH If standard detergent or multi-tablets All the consumption values without rinse aid are used, activate the mentioned in this section are notification to keep the rinse aid refill determined in accordance indicator active. with the currently applicable standard in laboratory How to deactivate the rinse conditions with water aid empty notification...
-
Page 12: Before First Use
AirDry is automatically activated with all • is off = The acoustic signal is off. programmes excluding applicable). • is on = The acoustic signal is The duration of the drying phase and the 3. Press the programme button to door opening time vary depending on the change the setting. -
Page 13: Daily Use
ENGLISH 7.2 How to fill the salt 7.3 How to fill the rinse aid container dispenser 1. Turn the cap of the salt container counterclockwise and remove it. 2. Put 1 litre of water in the salt container (only for the first time). 3. - Page 14 8.1 Using the detergent 3. Press the programme button repeatedly until the indicator of the programme you want to select starts flashing. 4. Close the appliance door to start the programme. Starting a programme with delay start 1. Set a programme.
-
Page 15: Hints And Tips
ENGLISH When you cancel the delay start, you automatically the appliance when it is not have to set the programme again. operating. The function comes into operation: Cancelling the programme • When the programme is complete. • After 5 minutes if a programme was Press and hold the programme button for not started. - Page 16 Using too much • Do not wash in the appliance items detergent with soft or softened water that can absorb water (sponges, results in detergent residues on the household cloths). dishes. Adjust the amount of •...
-
Page 17: Care And Cleaning
ENGLISH 10. CARE AND CLEANING WARNING! Before maintenance, deactivate the appliance and disconnect the mains plug from the main socket. Dirty filters and clogged spray arms decrease the washing results. Make a 4. Wash the filters. check regularly and, if necessary, clean them. - Page 18 CAUTION! 3. To install the spray arm back, press it An incorrect position of the downwards. filters can cause bad washing results and damage to the appliance. 10.2 Cleaning the lower spray We recommend to clean the lower spray arm regularly to prevent soil from clogging the holes.
-
Page 19: Troubleshooting
ENGLISH programmes at least twice a month to CAUTION! prevent the buildup. If unable to remove the foreign objects, contact an 10.5 Removal of foreign Authorised Service Centre. objects 1. Disassemble the filters system as Check the filters and the sump after each instructed in this chapter. - Page 20 Problem and alarm code Possible cause and solution The appliance does not drain the wa‐ • Make sure that the sink spigot is not clogged. ter. • Make sure that the interior filter system is not clogged. • The indicator flashes 2 times •...
- Page 21 ENGLISH Problem and alarm code Possible cause and solution The level of water inside the appliance • Switch the appliance off and on. is too high. • Make sure that the filters are clean. • Make sure that the outlet hose is installed at •...
- Page 22 11.1 The washing and drying results are not satisfactory Problem Possible cause and solution Poor washing results. • Refer to "Daily use", "Hints and tips" and basket loading leaflet. • Use more intensive washing programmes. • Clean spray arm jets and filter. Refer to "Care and Cleaning".
-
Page 23: Technical Information
ENGLISH Problem Possible cause and solution There are residues of deter‐ • The detergent tablet got stuck in the dispenser and gent in the dispenser at the therefore was not completely washed away by water. end of the programme. • Water cannot wash away the detergent from the dis‐... - Page 24 Left-on mode (W) Power consumption Off-mode (W) 0.50 1) Refer to the rating plate for other values. 2) If the hot water comes from alternative source of energy (e.g. solar panels), use the hot water supply to decrease energy consumption.
- Page 28 www.aeg.com/shop...