Advertisement
Quick Links
Fiber optic
connectors
Splice tray
(JPM440A, not
included)
Fiber optic cable
Fiber adapter panel
with 6 fiber optic
connectors installed
Figure 2. The JPM406A-R5 with three fiber adapter panels visible (up to nine more
can be stacked beneath the visible ones, for a total of 12 adapter panels).
The fiber cable is routed through the splice tray,
then terminated via the fiber optic connectors.
TRADEMARKS USED IN THIS MANUAL
Black Box and the Double Diamond logo are registered trademarks of BB Technologies, Inc.
Kevlar is a registered trademark of E.I. du Pont de Nemours and Company.
PLEXIGLAS is a registered trademark of Roehm GmbH & CO.
Any other trademarks mentioned in this manual are acknowledged to be the property of the trademark owners.
© Copyright 2009. Black Box Corporation. All rights reserved.
1000 Park Drive
•
Lawrence, PA 15055-1018
•
724-746-5500
•
Fax 724-746-0746
Advertisement
Related Manuals for Black Box JPM406A-R5
Summary of Contents for Black Box JPM406A-R5
- Page 1 6 fiber optic connectors installed Figure 2. The JPM406A-R5 with three fiber adapter panels visible (up to nine more can be stacked beneath the visible ones, for a total of 12 adapter panels). The fiber cable is routed through the splice tray, then terminated via the fiber optic connectors.
- Page 2 Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500) FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746 SUPPORT Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018 INFORMATION Web site: www.blackbox.com • E-mail: info@blackbox.com...
- Page 3 2. Overview The JPM406A-R5 is 3U high, fits in a 19" or 23" rack, and supports 12 adapter panels. (Each adapter panel has up to 12 connectors, for a maximum of 144 ports.) It provides termination for optical cables on the premises or in a central office.
- Page 4 7. Pull out the tray (see Figure 1) to install a fiber adapter and splice tray (if needed). Up to 12 fiber adapters can be installed in the JPM406A-R5; up to six can be installed in the JPM418A-R4. 8. Install the connectors on the multi-strand fiber cable, or make the splice as needed. (See Figure 2 for a typical cable installation.) Connect the fiber cable to the fiber adapters.