Page 1
6 fiber optic connectors installed Figure 2. The JPM406A-R5 with three fiber adapter panels visible (up to nine more can be stacked beneath the visible ones, for a total of 12 adapter panels). The fiber cable is routed through the splice tray, then terminated via the fiber optic connectors.
Page 2
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500) FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746 SUPPORT Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018 INFORMATION Web site: www.blackbox.com • E-mail: info@blackbox.com...
Page 3
2. Overview The JPM406A-R5 is 3U high, fits in a 19" or 23" rack, and supports 12 adapter panels. (Each adapter panel has up to 12 connectors, for a maximum of 144 ports.) It provides termination for optical cables on the premises or in a central office.
Page 4
7. Pull out the tray (see Figure 1) to install a fiber adapter and splice tray (if needed). Up to 12 fiber adapters can be installed in the JPM406A-R5; up to six can be installed in the JPM418A-R4. 8. Install the connectors on the multi-strand fiber cable, or make the splice as needed. (See Figure 2 for a typical cable installation.) Connect the fiber cable to the fiber adapters.