Installing The Display Assembly - Touch; Display Hinges; Removing Display Hinge - Non Touch - Dell Latitude E5470 Owner's Manual

Installing the display assembly - Touch

1. Place the display assembly to align with the screw holders on the computer.
2. Tighten the screws to secure the display assembly to the computer.
3. Route the display cable through the routing channel and route the antenna cables by pushing it through the hole.
4. Connect the antenna cables and display cable to the connectors.
5. Place the display cable bracket over the connector and tighten the screw to secure the display cable to the computer.
6. Place the display hinge bracket and tighten the screw to secure it to the computer.
7. Install the:
a. WLAN
b. WWAN
c. battery
d. base cover
8. Follow the procedure in

Display hinges

Removing display hinge - non touch

1. Follow the procedure in
2. Remove the:
a. Base cover
b. Battery
c. WLAN
d. WWAN
3. To remove the hinges:
a. Remove the screws that secure the display hinge to the display assembly [1, 3].
b. Remove the display hinge [2, 4].
After working inside your
Before working inside your
computer.
computer.
Disassembly and reassembly 25