Robertshaw RS9110 Operation Manual page 8

THERMOSTAT QUICK REFERENCE
Temperature Adjustment (if Using a Program Schedule)
Temporary Adjustment: You may temporarily change the desired temperature set-point
by pressing either or . The temperature will remain at this set-point until the next
programmed WAKE, LEAVE, RETURN, or SLEEP event. The program schedule will
then resume.
Program Schedule Hold: The thermostat will display HOLD and RUN SCHED on
the left of the screen when you press either or . You may hold the temperature at
a fixed temperature set-point and override the program schedule by pressing HOLD. The
thermostat will display HOLD below the temperature set-point to notify you that the program
schedule hold is in effect.
To Return to Programming: Press RUN SCHED to return to the program schedule.
6