Assembling Your Vacuum - Shark Rocket Deluxe Pro UV330 Owner's Manual

ASSEMBLING
YOUR VACUUM
DID YOU KNOW?
The motorized floor nozzle
and handheld vacuum
have LED lights that
illuminate the floor surface
being cleaned� The lights
turn on automatically in
either speed setting�
NOTE: To place in
MultiFLEX Storage mode,
®
press the MultiFLEX lock
release button and gently
fold the handheld vacuum
forward toward the floor
nozzle�
NOTE: Before vacuuming
your small area rugs
or carpet, refer to
the manufacturer's
recommended
cleaning instructions�
WHAT DOES THE
BRUSHROLL INDICATOR
LIGHT MEAN?
Solid Green
The brushroll is on and
working as it should�
Solid Red
There is a jam in the
1 Insert the wand into the motorized floor nozzle
brushroll area� Turn your
vacuum off and remove the connector, pressing it in until it clicks securely into
blockage� place�
No Light
2 Insert the handheld vacuum into the top of the
The brushroll is not spinning�
wand, pressing it in until it clicks securely into place�
Flashing Red
The motorized floor nozzle
is overheating� Turn your
vacuum off and wait
for it to cool down� See
Troubleshooting section for
more information�
7
1-800-798-7398
CLICK
CLICK
USING THE MOTORIZED
FLOOR NOZZLE
1 Slide the Power/Selector Switch to
the appropriate setting:
Setting O: Turns off power�
Setting I: For cleaning bare floors and
small area rugs�
Setting II: For cleaning carpets�
To start cleaning, recline wand to
activate brushrolls�
NOTE: For deep carpet cleaning per ASTM
F608 (embedded dirt in carpets) please use
setting II, Carpets�
Using the MultiFLEX® Wand
To easily access hard-to-reach areas
under furniture, press the MultiFLEX lock
release button to position the wand to a
lower angle�
s h a r kc l e a n . c o m
8