Checking For Blockages - Shark Rocket Deluxe Pro UV330 Owner's Manual

MAINTAINING YOUR VACUUM - continued
TIP: Ensure the bottom
of the floor nozzle is
completely sealed and
locked before using�
TIP: You do not need
any tools to open the
floor nozzle—just a coin�

CHECKING FOR BLOCKAGES:

HANDHELD VACUUM AND WAND
1
Remove the wand from the handheld vacuum and
check all dust cup intake openings�
2
Remove the floor nozzle from the wand and check
the wand for blockages�
15
1-800-798-7398
STEP 1
STEP 2
BOTTOM OF FLOOR NOZZLE
1
Use a coin to open the three locks on
the bottom of the floor nozzle�
2
To access the brushroll, remove
the cover from the bottom of the
floor nozzle� Shine a flashlight from
the bottom to check for possible
blockages in the airway�
STEP 3
STEP 4
3 Remove any string, carpet fibers, or
hair that may be wrapped around
the brushroll� Loosen debris by
running a pair of scissors along the
groove in the brushroll�
4
To reinstall the cover, line it up,
then rotate down until it clicks
into place� Use the edge of a coin
to close the three locks on the
bottom of the nozzle�
s h a r kc l e a n . c o m
16