NETWORK CONNECTIONS
Ribbon Cables
Figure 3-5. Connecting a Daughter Board
• Secure the daughter board bracket to the computer frame.
Replace the computer covers, reconnect all cables and power
up the computer.
• Connect the FDDI cables to adapter and daughter board
according to the FDDI ring configuration. Consult the ANSI
X3T9.5 specification for a description of Dual Attach Station
FDDI ring topology.
• After connecting the adapter and daughter board to the FDDI
ring, observe the LANVIEW LEDs (see Section 2.5) to
determine the status of the adapter and the FDDI ring.
Page 3 - 8
Alignment Keys
FDDI Adapter
Alignment Keys
Daughter Board