Table of Contents
Advertisement
• Power up the computer. The computer should recognize the
F70XX adapter at this time; the heartbeat pulse of one flash per
second should be visible (for a period of thirty seconds) on the
Processor LED. (See Section 2.5, LANVIEW LEDs, which
follows.)
2.5
LANVIEW LEDS
The FDDI network adapters incorporate Cabletron Systems' built-
in LANVIEW
®
LANVIEW LEDs (shown in Figure 2-4) are more effective than a
network monitor, because network troubleshooting personnel can
quickly scan the LEDs to diagnose network problems and
determine which network segment is faulty.
visual diagnostic and status monitoring LEDs. The
Processor
(red)
Receive Data
(yellow)
Figure 2-4. LANVIEW LEDs
INSTALLING THE ADAPTERS
Transmit Data
(green)
Bicolor LED
No Connection - (red)
Signal Detect - off
Link - (green)
Page 2 - 7
Advertisement
Table of Contents
