D/ Type D support (ref. 915174)
• Pour 4 blocks of concrete for the 2 posts and the 2 prop beamss with the help of the jigs (915194).
• Seal the 8 anchor bolts (915178) in each block (2 anchors per block) and then tighten the nuts.
Make sure you carefully check the spacing and height of the anchor bolts
The volume of the blocks is to be calculated in accordance with the nature of the terrain and the wind exposure of the
board.
• Assemble the upright posts with the props and lock the nuts (A).
Upright post
Prop beam
A
Nut HU M12
Screw TH M12x30
Serrated washer Ø12
200
A
C
Nut HU M16
Flat washer M16
Bent anchor bolt M16
B
1527,50
245
B
Rigid insulating tube Ø20
Plate edge clips
2000
245
C
Rigid insulating tube and clips
to be assembled on site
7