C/ Type C support (ref. 915173)
• Pour two blocks of concrete for the two posts with the help of the jigs (915193).
• Seal the 8 anchor bolts (915178) in each block (4 bolts per block) and then tighten the nuts.
Make sure you carefully check the spacing and height of the anchor bolts.
The volume of the blocks is to be calculated in accordance with the nature of the terrain and the wind exposure of the
board.
Upright post
6
B
Nut HU M16
Flat washer M16
Bent anchor bolt M16
160
A
320
A
Rigid insulating PVC tube Ø20
2000
180
Plate edge clips
Rigid insulating tube and clips
to be assembled on site
180
B