Attaching The Support To The Ground; A/ Type A Support (Ref. 915170) - Bodet Score BT2000 Series Installation Instructions Manual

III - Attaching the support to the ground
Jigs are supplied upon request with each support system to help in positioning the posts.

A/ Type A support (ref. 915170)

• Pour two blocks of concrete for the two posts with the help of the jigs (915191).
• Seal the 8 anchor bolts (915178) in each block (4 anchors per block) and then tighten the nuts.
Make sure you carefully check the spacing and height of the anchor bolts.
The volume of the blocks is to be calculated in accordance with the nature of the terrain and the wind exposure of the
board.
Upright post
Nut HU M16
Flat washer M16
Bent anchor bolt M16
4
B
A
Rigid insulating PVCtube Ø20
100
A
200
220
Plate edge clips
Rigid insulating tube and clips
to be assembled on site
1200
200
1000
B