D/ Bt 2045 Alpha - Bodet Score BT2000 Series Installation Instructions Manual

D/ BT 2045 ALPHA

• (A) Connect the flat cable from the timer panel to connector 1 on the
electronic board of the master panel.
• (B) Connect the flat cable from the HOME Alpha score panel to the
master panel connector on the flat cable for control of the GUEST score
modules.
• (C) Connect the control wires (GND green, RT- brown and RT+ white)
of the alphanumeric readout from the HOME Alpha score panel to the
terminal strip on the master panel.
• (D) Connect the power supply from the HOME Alpha score panel to the
terminal strip on the master panel.
• (E) Connect the mains power supply on the mains unit of the master
panel.
• If it is used, plug in the DCF antenna (see page 23).
• (F) The control cables must run inside the cable duct.
• (G) The power supply cables must come out on the left side (rear view) along the post.
Timer panel
HOME ALPHA score panel
Master panel
Power supply
G
Flat cable for GUEST
score control
A
B
F
29