B/ Type B support (ref. 915171)
• Pour 4 blocks of concrete for the 2 posts and the 2 prop beams with the help of the jigs (915192).
• Seal the 8 anchor bolts (915178) in each block (2 anchors per block) and then tighten the nuts (B).
Make sure you carefully check the spacing and height of the anchor bolts.
The volume of the blocks is to be calculated in accordance with the nature of the terrain and the wind exposure of the
board.
• Assemble the upright posts with the props and lock the nuts (A).
Upright post
Prop beam
A
Nut HU M10
Screw TH M10x30
Serrated washer Ø10
C
Nut HU M16
Flat washer M16
Bent anchor bolt M16
120
A
B
984
200
B
Rigid insulating PVC tube Ø20
Plate edge clips
1200
200
C
Rigid insulating tube and clips
to be assembled on site
5