Black & Decker BD06WT6 Instruction Manual page 13

SET UP & USE
INSTALL WEATHER STRIPPING
(only be applicable to Energy star
models)
In order to minimize air leaks between
the room air conditioner and the
window opening, trim the weather
stripping with a proper length, peel off
the protective backing and plug any
gaps if needed (Fig.11).
Fig. 11
IF AC IS BLOCKED BY STORM
WINDOW
Add wood as shown in Fig.12 or
remove storm window before air
conditioner is installed. If Storm
Window Frame must remain, be
sure the drain holes or slots are not
caulked or painted shut. Accumulated
Rain Water or Condensation must be
allowed to drain out.
REMOVING AC FROM WINDOW
Turn AC off and disconnect power
cord. Remove sash seal from between
windows and unscrew safety sash
lock. Remove screws installed through
frame and frame lock. With 2 people,
keeping a firm grip on air conditioner,
raise sash and carefully remove. Be
carefully not to spill any remaining
water while lifting unit from window.
Store parts WITH air conditioner.
Fig. 12
ENGLISH
Page 13