Advertisement
Quick Links
II
Keep for future reference. Common problems and solutions are listed within this booklet.
IMPORTANT INFORMATION INSIDE:
--------CONTENTS
1- Thanks
6-
7-
2- How It Works
3- Hazards
8-
4- Caution
9-
5- Specifications
10- Maintenance
Getting Started
CDMPl 840GRY & CDMPl 810
CDHPl 840GRY
Labeled Fan
Read, understand, and follow all safety information
and instructions.
11- Troubleshooting
12- Warranty
13- Warranty Registration &
Contact Information
Advertisement
Related Manuals for Maxx air CDMPl1 840GRY
Summary of Contents for Maxx air CDMPl1 840GRY
- Page 1 Keep for future reference. Common problems and solutions are listed within this booklet. IMPORTANT INFORMATION INSIDE: Read, understand, and follow all safety information and instructions. --------CONTENTS 1- Thanks Getting Started 11- Troubleshooting 2- How It Works CDMPl 840GRY & CDMPl 810 12- Warranty 3- Hazards CDHPl 840GRY...
- Page 2 THANK YOU Thank you for selecting our self-contained misting equipment for your comfort conditioning needs. Our products are engineered with the most reliable components available and are equipped with features to Thanks again and stay cool! assure ease of use, mobility, and maintenance. 2-------HOW I T WORKS The cool air you will now enjoy is created through the process of evaporation.
- Page 3 5-------SPECIFICATIONS • Voltage (VAC): 120 • Frequency (Hz): 60 • Fan Amps: 2.1 • Total 3.6 Amps • CFM: Up to 3500 (High) • Speeds: Hi/ Med/ Low • Model# CDMPl 840GRY: 18"fan head, 180 psi pump, 40 gal cooler case, pumps out 3 gph •...
- Page 4 8------HI PRESSURE UNITS Follow directions in the "Getting Started" section. Once the fan and base are in place and the filter is at the bottom of the cooler, plug in the fan and unscrew any nozzle on the mist ring by turning it counter-clockwise. Place the hand pump's hose over the nozzle opening.
-
Page 5: 11 Troubleshooting
TROUBLESHOOTING - ---- PROBLEM: Not Misting Make sure hose is at the bottom of the cooler and the filter is completely submerged in water. Run through the start-up procedure to clear air from hose. Make sure ring valve is in the "open" position. Water will not flow if it is closed. PROBLEM: Nozzle is Shooting a Stream of Water Remove and clean nozzles Scrape the opening with a hard metal surface or flat head screwdriver while the system is... - Page 6 13---WARRANTY REGISTRATION Please keep the following information for your records. IMPORTANT RECORD OF PURCHASE Purchaser's Name: _ _________ _________ _ _ Date of Purchase: __ ; __ ; __ _ Store Name: _______ _ A dd ress: _______________________ _ State: __ _ Zip Co d e: ____ _ City: _______ _ Model: _ ______ _...
Need help?
Do you have a question about the CDMPl1 840GRY and is the answer not in the manual?
Questions and answers