sunjoe 20ViONLTE-ST11-RM Operator's Manual

sunjoe 20ViONLTE-ST11-RM Operator's Manual

Cordless trimmer + edger

Advertisement

Quick Links

OPERATOR'S MANUAL
A Division of Snow Joe
, LLC
®
© 2021 by Snow Joe
, LLC
®
All rights reserved. Original instructions.
CORDLESS TRIMMER + EDGER
R
11-INCH | 20-VOLT
Model 20ViONLTE-ST11-RM
SAVE THESE INSTRUCTIONS
1
Form No. SJ-20ViONLTE-ST11-RM-880E-M-V1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 20ViONLTE-ST11-RM and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for sunjoe 20ViONLTE-ST11-RM

  • Page 1 CORDLESS TRIMMER + EDGER 11-INCH | 20-VOLT OPERATOR’S MANUAL Model 20ViONLTE-ST11-RM A Division of Snow Joe , LLC ® Form No. SJ-20ViONLTE-ST11-RM-880E-M-V1 © 2021 by Snow Joe , LLC SAVE THESE INSTRUCTIONS ® All rights reserved. Original instructions.
  • Page 2: General Safety

    11-INCH | 20-VOLT OPERATOR’S MANUAL Model 20ViONLTE-ST11-RM A Division of Snow Joe , LLC ® Form No. SJ-20ViONLTE-ST11-RM-880E-M-V1 IMPORTANT! 4. Use safety glasses – Also use safety footwear, snug- fitting clothing, protective gloves, hearing and Safety Instructions head protection. 5. Use the right tools – Do not use tools for any job except All Operators Must Read These that for which they are intended.
  • Page 3: Battery & Charger Safety Instructions

    14. Keep away from the cutting line – It can seriously injure WARNING! Use only approved replacement batteries; the skin. other batteries may damage the trimmer + edger and cause it 15. Do not try to stop the cutting device with your hands – to malfunction.
  • Page 4 • Do not burn or incinerate battery packs – Battery packs 6. Do not ignite the battery pack or expose it to fire. may explode, causing personal injury or damage. Toxic 7. Do not exhaustively discharge batteries. Exhaustive fumes and materials are created when battery packs discharge will damage the battery cells.
  • Page 5 9. When handling batteries, be wary of electrostatic discharged batteries. Frequent insertion of a charged or partially charged battery pack will result in overcharging charge. Electrostatic discharges can damage the and cell damage. Do not leave batteries in the charger for electronic protection system and the battery cells.
  • Page 6: Safety Symbols

    Safety Symbols The following table depicts and describes safety symbols that may appear on this product. Read, understand, and follow all instructions on the machine before attempting to assemble and operate. Symbols Descriptions Symbols Descriptions READ THE OPERATOR'S MANUAL(S) – Read, understand, Keep bystanders and children and follow all instructions in the a safe distance away.
  • Page 7: Know Your Cordless Trimmer + Edger

    Know Your Cordless Trimmer + Edger Read the owner’s manual and safety instructions carefully before operating the cordless trimmer + edger. Compare the illustration below to your cordless trimmer + edger in order to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference.
  • Page 8: Carton Contents

    Unpacking 2. Place the safety guard in the direction of the arrow shown to align it with the screw hole in the motor housing (Fig. 2). Carton Contents Fig. 2 • Cordless trimmer + edger • Safety guard • Edger guide + flower guard Safety guard •...
  • Page 9: Charger Operation

    Fig. 5 Small hole on the housing Lights Light Indicators Charge level button The battery is at 25% capacity and requires charging The battery is at 50% capacity and requires charging soon The battery is at 75% capacity Curved ends of edger guide + The battery is at full capacity flower guard...
  • Page 10 Charging the Battery Fig. 9 1. Pull the push lock button on the battery to pull the battery green pack out of the equipment (Fig. 7). Charging Charged Fig. 7 Push lock button NOTE: If the charger plug light remains green while the charger base light alternately flashes red and green, this indicates a Battery pack temperature abnormality (i.e.
  • Page 11: Charging A Hot Or Cold Battery Pack

    IMPORTANT! Never allow the battery pack to become fully Fig. 12 discharged as this will cause irreversible damage to the battery. Charging a Hot or Cold Battery Pack Auxiliary handle A red and green flashing indicator light on the charger base indicates that the battery pack temperature is outside the charging range.
  • Page 12 Starting + Stopping Fig. 14 Before you start the unit, make sure the trimmer is not contacting any object. 1. Insert the battery in the battery compartment (Fig. 16). Fig. 16 4. Lock the telescoping tube in position by turning the telescoping locking coupler counter-clockwise.
  • Page 13 Trimming Fig. 18 • Wear non-slip gloves for maximum grip and protection. • For the best cutting action against walls, fences, and in high grass, move the grass trimmer slowly so grass is cut with the tip of the high speed nylon line. •...
  • Page 14 Edging Fig. 23 1. To convert for maintenance edging, turn OFF the tool and remove the battery. 2. To use the edger guide + flower guard, flip it down from its stored position (Fig. 21). Fig. 21 5. Use the edge of the guard as a guide when cutting near fences and walls (Fig.
  • Page 15 NOTE: The string will extend approximately 1/4 in. with each Fig. 25 stop and start of the switch trigger until the string reach the length of the safety guard. 3. Resume the trimming + edging. WARNING! Do not operate the grass trimmer + edger in a tree, on a ladder, or on a scaffold;...
  • Page 16: Winding The Line

    NOTE: A single-line factory wound spool (model 20ViON- STRS-6PK) is available for easy spool replacement on the 20ViONLTE-ST11-RM cordless trimmer + edger. Visit sunjoe.com to purchase this accessory online. Should you wish to wind the line yourself, the instructions are provided below.
  • Page 17: Service And Support

    Service and Support If your Sun Joe 20ViONLTE-ST11-RM cordless trimmer + ® edger requires service or maintenance, please call the Snow + Sun Joe customer service center at 1-866-SNOWJOE ®...
  • Page 18: Troubleshooting

    Troubleshooting Problems Possible Cause Possible Solution The motor does not • Battery is not inserted well or is flat. • Check to make sure the battery is charged and inserted run or the tool runs well. • Spool housing cannot rotate freely. slowly.
  • Page 19 NOTE: Accessories are subject to change without any obligation on the part of Snow Joe + Sun Joe to provide notice of such ® ® changes. Accessories can be ordered online at sunjoe.com or via phone by contacting the Snow Joe + Sun Joe customer ® ®...
  • Page 20 NOTES...
  • Page 21 NOTES...
  • Page 22 NOTES...
  • Page 23 SNOW JOE + SUN JOE REFURBISHED GOODS WARRANTY ® ® Snow Joe + Sun Joe may from time to time change the design of ® ® GENERAL CONDITIONS: its products. Nothing contained in this warranty shall be construed Snow Joe + Sun Joe operating under Snow Joe , LLC warrants...
  • Page 24 sunjoe.com...

Table of Contents