Adjusting The Air Flow Direction - Daikin FT50FVM Operation Manual

Adjusting the Air Flow Direction

You can adjust the air flow direction to increase your com-
fort.
■ To adjust the horizontal
blade (flap)
1. Press "SWING button
• " " is displayed on the LCD.
2. When the flap has reached the
desired position,
press "SWING button
more.
• The flap will stop moving.
• " " disappears from the LCD.
■ To adjust the vertical
blades (louvers)
Hold the knob and move the louvers.
(You will find a knob on the left-side and the right-side blades.)
Notes on flaps and louvers angles
• When "SWING button" is selected, the flaps swinging range
depends on the operation mode.
(See the figure.)
■ ATTENTION
• Always use a remote controller to adjust the flaps angle. If
you attempt to move it forcibly with hand when it is swinging,
the mechanism may be broken.
• Be careful when adjusting the louvers. Inside the air outlet, a
fan is rotating at a high speed.
12
".
" once
In COOL or DRY mode
STOP
COOL
approx. 10˚~40˚
DRY
approx. 5˚~35˚
In FAN mode
STOP
FAN
approx. 5˚~55˚
1, 2