3M C1025 Operating Instructions Manual page 11

Model C1025
7 T2 (Talk Lane 2)
Switch
8 T1 (Talk Lane 1)
Switch
9 Battery Release
10 Battery
11 Programming Jack
©3M 2006
For dual-lane systems, press and hold the T2 (Talk Lane 2) switch to talk
to the customer at the menu sign in lane 2. Release the switch to listen.
For single-lane systems, both switches operate identically.
Press and hold the T1 (Talk Lane 1) switch to talk to the customer in lane
1. Release the switch to listen.
Push the battery release toward the center of the unit to release the battery.
This rechargeable battery provides power to the control unit.
This jack accepts the programming cable from the base station to allow the
transceiver pack to be programmed to the same radio channel as the base
station.
Controls and Indicators
5