Advertisement
3. Elevator motor
2)
1)
4)
3)
[Note] Before removing the lower cover on the FN3, make sure the
tray 3 is at the upper limit position.
If the tray 3 is not at the upper limit position, turn the knurled
part on the shaft (A) in the sketch and move the tray 3 to the
upper limit.
7)
7)
7)
7)
7)
12)
11)
9)
8)
8)
10)
14)
16)
A
[Note] When setting the elevator motor 16), pay attention to the
direction of the filter PWB A. For the direction, see the sketch
given above.
5 – 2
AR-FN3
13)
13)
8)
15)
8/19/1999
Advertisement
