For a copy of the QSC Limited Warranty, visit the QSC website at www.qsc.com Introduction The SR-800 is a compact cinema surround loudspeaker providing high performance for smaller cinemas. The SR-800 is designed for safe and secure mounting: • Pre-installed hardware allows fast, single-installer, wall mounting with optional wall brackets supporting down-angles of 0° or 8°.
Installing the SR-800 WARNRNG!: Read and follow these instructions carefully. If the loudspeakers are not suspended properly, they could fall, causing personal injury and damage to the equipment. Rules for Suspension Consult a Professional Mechanical or Structural Engineer, licensed in the jurisdiction of the sound system installation, to review, verify, and approve all attachments to the building or structure.
Yoke Mounting Refer to Figure 2 Mount the loudspeaker on the wall using the YM-300 yoke bracket. The yoke is sold separately. Refer to TD-000376 Yoke Mount Bracket User Manual for mounting instructions. The document is delivered with the brackets. RPRT!: If the yoke is not used, be sure the screws on both sides of the enclosure are installed and tightened into threaded inserts to prevent air leak.
Loudspeaker Connections Amplifier The SR-800 has two 5-way binding posts. Be sure to maintain consistent polarity from the amplifier to the loudspeaker’s input terminals. Wire each loudspeaker individually ("home run") to the amp rack location to allow for wiring flexibility.
Page 6
SR-800 Dimensions 298 mm 227.94 mm 11.7 in 8.974 in 262.84 mm 10.344 in 298 mm 11.7 in TD-001574-01-A1...