QSC SR-1590 User Manual
QSC SR-1590 User Manual

QSC SR-1590 User Manual

Surround loudspeaker

Advertisement

Quick Links

SR-1590

User Manual

SR-1590 Surround Loudspeaker
TD-000536-00-A
*TD-000536-00*

Advertisement

Table of Contents
loading

Summary of Contents for QSC SR-1590

  • Page 1: User Manual

    SR-1590 User Manual SR-1590 Surround Loudspeaker TD-000536-00-A *TD-000536-00*...
  • Page 2: Explanation Of Symbols

    10. Adhere to all applicable, local codes. 11. Always keep sound pressure levels in the listening area below levels that can damage human hearing. Warranty For a copy of the QSC Limited Warranty, visit the QSC website at www.qsc.com TD-000536-00-A...
  • Page 3: Safety Cable

    Introduction The SR-1590 is a high-power, compact cinema surround loudspeaker that addresses the requirements of the new immersive sound formats. The SR-1590 is designed for safe and secure overhead mounting: • Pre-installed hardware allows fast single-installer wall mounting with optional wall brackets supporting down-angles of 0° or 8°.
  • Page 4: Wall Mounting

    Refer to Refer to TD-000381 "Surround Mounting Brackets" user manual (delivered with the mounting brackets), for mounting instructions. The SR-1590 comes with a pre-attached bracket (1) for use with QSC's QM-SW or QM-BW wall bracket (order separately). Yoke Mounting Refer to —...
  • Page 5: Loudspeaker Connections

    2. Install your selected mounting bracket according to the manufacturer's instructions. Be sure to replace screws into any unused holes. Loudspeaker Connections The SR-1590 has a 4-position screw-type barrier strip, which accepts up to 10-gauge (10 AWG) bare wire or spade lugs. Be sure to maintain consistent polarity from the amplifier to the loudspeaker’s input terminals.
  • Page 6 SR-1590 Dimensions 127 mm 5 in 396 mm 15.6 in. 127 mm 5.0 in 70 mm 70 mm 70 mm 2.75 in 2.75 in 2.75 in 514 mm 20.2 in. 392 mm 15.0 in 350 mm 14.0 in 600 mm 24.0 in.
  • Page 7: Specifications

    2 AES2-1984 noise signal for 2 Hours 3 On-Axis, free-field sensitivity, 2.0 V, 1 m 4 Calculated from rated noise voltage and sensitivity 5 Average (500Hz - 8kHz) As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice. TD-000536-00-A...
  • Page 8 © 2016 QSC, LLC. All rights reserved. QSC and the QSC logo are registered trademarks of QSC, LLC in the U.S. Patent and Trademark office and other countries. All other trademarks are the property of their respective owners.

Table of Contents