Related Manuals for QSC SC-2150
Summary of Contents for QSC SC-2150
- Page 1 SC-2150 ® Quick Start Guide SC-2150 Screen Channel Loudspeaker System TD-001624-01-A *TD-001624-01*...
-
Page 2: Explanation Of Symbols
For a copy of the QSC Limited Warranty, visit the QSC website at www.qsc.com Introduction The SC-2150 is a 3-way, selectable passive full-range or bi-amplified screen channel loudspeaker system comprised of two main units. These units are shipped in separate cartons. - Page 3 CAUTIONN! An active crossover must be used to protect the loudspeaker from damage. It is highly recommended to use a QSC processor with factory DSP presets for the SC-2150 for best results. The Mode Switch must be in the BI-AMP position and all four terminals are used to connect the amplifier to the loudspeaker. The Low Frequency amplifier connects to the left pair of terminals and the High Frequency amplifier connects to the right pair of terminals.
-
Page 4: Center Channel
Mounting Platforms The maximum room length for the SC-2150 is 55 ft (17 m). Use in larger rooms may result in driver failures. For best performance, Bi-Amp mode should be used whenever possible and especially for rooms at the upper end of the size range. -
Page 5: Specifications
Maximum Recommended Amplifier Power 1000 W RMS 320 W RMS Recommended Processing Subsonic filter below 30 Hz, 4th order LR crossover at 500 Hz via QSC >18 dB per octave processor Connectors Barrier strip screw terminals accept up to Factory installed NL4 plug for connection... - Page 6 SC-2150 Dimensions 14.5” 368 mm 6.8” 173 mm 16.3” 414 mm 17.3” 440 mm 55.6” 1,412 mm 38.3” 972 mm 30” 762 mm TD-001624-01-A...
- Page 7 QSC Technical Services. httpsE://qscprod.force.com/selfhelpportal/s/ © 2020 QSC, LLC. All rights reserved. QSC and the QSC logo are registered trademarks of QSC, LLC in the U.S. Patent and Trademark office and other countries. All other trademarks are the property of their respective owners.