Advertisement
Enable/Disable Daylight Saving Time and Setting Daylight Saving Time Rule
Configure the time switch to automatically adjust for Daylight Saving Time (DST). If DST does not apply to your region, disable the
option as directed in this procedure. Follow this procedure to enable/disable the Daylight Saving Time feature, and if applicable, set
the DST rule.
Press MODE to advance to the Set DST mode selection if this selection is not already active. The SET and DST icons appear on
1.
the display.
2.
Press + to display ON (enable DST) or press – to display OFF (disable DST) and then press ENTER/NEXT to save.
If DST is
Enabled
Disabled
3.
Press + or - to scroll to the desired DST rules for your area.
NOTE: The DST rules are US2007 (US rules), MX1986 (Mexico rules), and CUSTOM (user-defined start/end dates).
If you select
US2007 or MX1986
Custom
4.
Press + or - to select a starting month for customized DST and press ENTER/NEXT.
5.
Press + or - to select a starting week (1ST, 2ND, 3RD, 4TH, or LST) and press ENTER/NEXT.
NOTE: DST changes at 2:00 A.M. on Sunday of the user-configured starting and ending weeks. Select LST for the fifth Sunday
of a month.
6.
Press + or - to select an ending month and press ENTER/NEXT.
7.
Press + or - to select an ending week and press ENTER/NEXT.
8.
Press MODE to save the DST rules and move to the next mode selection.
Setting Fixed Timed Events
Access the Fixed ON/OFF screen to set fixed switching times. Odd-numbered events are for ON switching and even-numbered
events are for OFF switching. Follow these steps to set fixed time events (if no fixed events need to be set press MODE to move to
the next mode selection):
1.
Press MODE to advance until SET FIXED ON/OFF EVENTS and ON@ icons appear on the display (if this selection is not
already active). The Event Number and LOAD icon for each circuit are also displayed. Press ENTER/NEXT if this fixed on event
is not needed, go to step 5.
2.
If an event is not set the time display will show - - - -.
3.
Press + or - to set the time for the fixed event to occur.
4.
Initially both circuits are included with this event. Press ON/OFF buttons to remove each circuit not affected by this event. If the
LOAD icon for the circuit is displayed then this circuit will respond to this event.
The Event Number increments and the SET FIXED ON/OFF EVENTS and OFF@ icons are displayed. Press ENTER/NEXT if
5.
this fixed off event is not needed, go to step 10.
6.
If an event is not set the time display will show - - - -.
7.
Press + or - to set the time for the fixed event to occur.
8.
Initially both circuits are included with this event. Press ON/OFF buttons to remove each circuit not affected by this event. If the
LOAD icon for the circuit is displayed then this circuit will respond to this event.
9.
Press ENTER/NEXT to save.
10. The Event Number increments and the SET FIXED ON/OFF EVENTS and ON@ icons are displayed. Press ENTER/NEXT if
this fixed off event is not needed.
If
Another fixed event needs to be set
All the events are set
Then
Go to step 3.
Press MODE to save and exit. The procedure is complete.
Then
Go to step 8. NOTE: To view the start and end dates for a DST rule, press ENTER/
NEXT to scroll through the dates and then press MODE.
Press ENTER/NEXT. The screen displays a flashing MAR and 2ND. Go to step 4.
Then
Return to step 2.
Press MODE to save and exit. The procedure is complete.
Advertisement
