Adjusting Height - Beko DIT25401 Installation Manual

A
Place the two mounting brackets into the top
corners of the dishwasher.
Fix the mounting brackets (A) to the top corners
of the dishwasher, with the screws supplied.
Bend sides of mounting brackets (B) in order to
fix from sides (if necessary).

6.3 ADJUSTING HEIGHT

If the height of the enclosure is 337/8" to 357/8"
(861 mm - 911mm) adjust supports as shown in
the figure.
Supplied (4)
Adjust the front foot level with the adjusting
wrench to balance and raise the dishwasher to the
enclosure height.
Adjust the rear foot level with a screwdriver to
balance and raise the dishwasher to the enclosure
height.
NOTICE :
Make sure the dishwasher is plumb and
•
notice dishwasher can be placed with a small
clearance under the counter top.
Turning the screwdriver in the direction of
•
the black arrows will bring the dishwasher
back feet up.
Turning the screwdriver in the direction of
•
the white arrows will take the dishwasher
rear feet down.
B
10
USA