Readjusting Foot Levels; Adjusting The Movable Toe Kick - Beko DIT25401 Installation Manual

7.3 ADJUSTING THE MOVABLE TOE KICK

Now that you have successfully installed the dishwasher, you
need to attach the toe kick to the dishwasher. The two piece
toe kick can be adjusted to the height and depth needed for
your kitchen. Be sure to use the slotted toe kick in the front
and the other behind it. They slide into each other.
Place parts K and L to the channel shown in Figure A for both
sides as shown in Figure B. Then fix them in the direction
shown with the arrow in Figure C and Figure B.
7.2 READJUSTING FOOT
LEVELS
Now that the dishwasher is in the
cabinet you must readjust the feet to
bring the dishwasher up to the required
height and attach it underneath the
countertop.
1. Readjust the front foot levels with
adjusting wrench to balance the
dishwasher and raise it up under the
countertop, make sure the unit is level.
2. Readjust the rear foot levels with a
screwdriver to balance the dishwasher
and raise it to the required height using
the brackets supplied.
3. Attach the dishwasher underneath
the countertop with the four screws
supplied (Ø 1/8" x 1/8" - Ø 3.5mm
x 14mm). Make sure you do not go
through the top of the countertop or
damage granite.
TALL TUB MODELS ONLY
17
USA