Installation - MTI Plunger Lock Quick Start Manual

INSTALLATION

1
Ensure that keys have been correctly registered and
locks have been completely set up before installing.
Fully close the sliding doors.
3
Open the sliding doors to fully expose the latch template,
which will aid in placement.
www.mobiletechinc.com | T:800.426.6844
MTI PLUNGER LOCKS™ PRODUCT MANUAL
2
Place Template A on the back panel and slip it between
the panels. The template notch should face away from
the front panel, aligning the gray line on the template
with the edge of the front glass pane. Use adhesive to set
the template in place.
4
Peel the backing off the VHB on the latch.
MTI P/N 063-00259 rev A ©2019 MTI All Rights Reserved
5