Key Sets (Sold Separately); Key Registration; Deleting Keys (Non-Connect Mode Only) - MTI Plunger Lock Quick Start Manual

KEY SETS (SOLD SEPARATELY)

Key Starter Set –
185-00459
KEY REGISTRATION (Complete ALL programming before installing)
1
Swipe Authorization card to enter
enrollment mode. You will hear
a double beep tone, indicating
enrollment mode has been entered.

DELETING KEYS (Non-Connect Mode Only)

1
Hold Authorization Card to lock for 5 seconds, and lock
will start a ticking sound. This enters delete mode.
www.mobiletechinc.com | T:800.426.6844
User Key Bulk (x5) Pack -
185-00460
x1
x2
2
Swipe each User card to lock. A
double beep tone indicates a card is
now enrolled. Repeat for each user
card, up to 250 user cards. If a card
fails to be recognized, the lock will
emit 4 fast beeps.
MTI PLUNGER LOCKS™ PRODUCT MANUAL
x5
3
2
Swipe Authorization Card again to lock, within 10
seconds to clear all keys returning lock to a factory reset
state. Lock will emit a double beep, confirming the key
whitelist is cleared. It will stop ticking after 10 seconds
and resume normal operation if the Authorization Card is
not swiped again.
MTI P/N 063-00259 rev A ©2019 MTI All Rights Reserved
Connect Card -
401-00008
x1
Swipe Authorization card again to
close enrollment mode. Enrollment
mode times out after 3 minutes of no
activity. Lock will emit 4 fast beeps
when enrollment has timed out.
2