Dolmar DCS4610 Operator's And Safety Manual page 28

Files and how to work with them
Sharpen using a special file holder with a saw chain round
file dia. 5/32" (4.0 mm). Normal round files are not appropriate
for this work. See "Accessories" for the order number.
The file should cut only when pushed forwards (arrow). Lift
the file when leading it backwards.
First sharpen the shortest cutter. The length of this cutter is then
the standerd for all other cutters of the chain.
Always guide the file horizontally (90
The file holder makes file guidance easier. It is marked for
the correct 30° sharpening angle (keep the marks parallel with
the chain when filing, see illustration) and limits the cut depth
to the correct 4/5 of the file diameter. See "Accessories" for
the order number.
After having sharpened the chain, the height of the depth limiter
must be checked by means of a chain gauge. See "Accessories"
for the order number.
Correct even the smallest excess height (13) with a special
flat file. See "Accessories" for the order number.
Round off the front of the depth limiter (14).
28
to the guide bar).
o
30°
13
D
4/5
E
14
F