Table of Contents
Advertisement
USE OF WIRELESS CONTROL
The control handle has a 2-in-1 function. It is a wireless control as well as a cable-operating control.
Before you use the control in the wireless mode, you must install the battery to make it operational.
With the battery installed, the control will work remotely. There is no need to remove the battery
when using the cable since the attached cable overrides the remote function.
MAINTENANCE
It is highly recommended that the winch be used at least once a month. Simply power the cable out
50 feet, free spool 16 feet and then power back in. This will keep all components in good working
condition so that the winch can be relied on when needed. Contact your authorized service center
for technical assistance and repairs.
Page
11
of 15
Advertisement
Table of Contents
