Display And Controls; Interpreting The Led Indicators - Viessmann Vitoconnect 100 Installation And Service Instructions For Contractors

Display and controls

A
Fig. 4
Reset button
A
LED indicates status of communication with heat
1
source.
LED indicates status of communication with
2
WLAN and Viessmann server.
LED indicates system functions (access point
3
mode, offline mode, update, fault).

Interpreting the LED indicators

LED Communication with the heat source
–
Flashes yellow.
Illuminates green.
Flashes red.
LED Communication with the Viessmann server
–
Flashes yellow.
Illuminates yellow.
Flashes green.
Illuminates green.
Flashes red.
1
2
3
Connection between Vitoconnect 100 and heat source being established
Connection between Vitoconnect 100 and heat source successfully established
No connection to the heat source, see page 16.
Connection between Vitoconnect 100 and WLAN router being established
Connection between Vitoconnect 100 and WLAN router successfully established
Connection between Vitoconnect 100 and Viessmann server being established
Connection between Vitoconnect 100 and Viessmann server successfully establish-
ed
No connection to the internet, see page 16.
Commissioning
13