Installation Sequence; Installing The Wall Mounting Bracket - Viessmann Vitoconnect 100 Installation And Service Instructions For Contractors

Installation location
Range reduction:
■ On their way between transmitter and receiver,
WLAN signals are damped, e.g. by air or when pen-
etrating walls.
■ WLAN signals are reflected by metallic objects e.g.
reinforcements in walls, metal foil of thermal insula-
tion and thermal glazing with metallised thermal
vapour deposit.

Installing the wall mounting bracket

Installation only in enclosed buildings.
3.
1.
Fig. 3
(cont.)
WLAN signals are isolated by service ducts and lift
■
shafts.
■ WLAN signals suffer interference from appliances
that also operate with high frequency signals,
such as computers, audio and video systems, wire-
less signals, electrical transformers and pre-ballast.
Distance to such appliances: minimum 2 m.
!
Please note
The installation site must be dry and free from
the risk of frost.
Ensure ambient temperatures between
40 °C.
2.

Installation sequence

5 and
−
11