Table of Contents
Advertisement
Quick Links
8 Channel Video Transmit Unit for a Multimode fibre link
The AMG4681R-CWDMn is a rackmount eight channel video transmit unit designed to transmit 8
video signals over one Multimode optical fibre.
The AMG4681R-CWDMn transmits on a CWDM wavelength defined by the 'n' in the CWDMn partno.
as detailed in the following table.
The AMG4681R-CWDMn is designed to plug into an AMG2009 or AMG2015 subrack, which in turn
fits into a 19" rack system.
The AMG4681R-CWDMn is designed to operate with AMG4682-CWDMn or rackmount equivalent
AMG4682R-CWDMn eight channel video receive unit in a point to point configuration.
AMG Systems Ltd. reserves the right to make changes to this
document without notice. The information herein is believed to
be accurate. No responsibility is assumed by AMG for its use.
using CWDM
Page 1 of 8
AMG4681R-CWDMn
Instruction Manual
AMG4681R-CWDMn Instruction Sheet
D18955-00.doc
Advertisement
Table of Contents
Related Manuals for AMG AMG4681R-CWDMn
Summary of Contents for AMG AMG4681R-CWDMn
- Page 1 The AMG4681R-CWDMn is a rackmount eight channel video transmit unit designed to transmit 8 video signals over one Multimode optical fibre. The AMG4681R-CWDMn transmits on a CWDM wavelength defined by the 'n' in the CWDMn partno. as detailed in the following table.
-
Page 2: Table Of Contents
Removal / replacement from / to the Case ..................6 Safety Maintenance and Repair AMG Systems Ltd. reserves the right to make changes to this Page 2 of 8 AMG4681R-CWDMn Instruction Sheet document without notice. The information herein is believed to D18955-00.doc... -
Page 3: Introduction
For CWDM wavelengths 11-16, ITU-T G652C or D fibre is recommended. Optical Connection The AMG4681R-CWDMn is connected as illustrated below when used with an AMG4682R-CWDMn 8-channel receive unit acting as a point to point system. AMG Systems Ltd. reserves the right to make changes to this... -
Page 4: Connections
Wavelength .......... Defined by 'n' in the AMG Partno. Optical Fibre ........Multimode NOTE: The optical launch power may overload the input of an AMG receiver if connected directly. A minimum of 5dB loss is required to ensure correct operation. -
Page 5: Front Panel Indicators
Primary Opto Sync RX ......Not used AMG Systems Ltd. reserves the right to make changes to this Page 5 of 8 AMG4681R-CWDMn Instruction Sheet document without notice. The information herein is believed to D18955-00.doc... -
Page 6: Physical Information
There are no user serviceable parts within AMG products. See unit data sheet for full specification. In case of problem or failure, please call your local support centre or contact: AMG Systems Ltd. at 3 The Omega Centre, Stratton Business Park, Biggleswade, Beds., SG18 8QB, UK. - Page 7 This page is intentionally blank. AMG Systems Ltd. reserves the right to make changes to this Page 7 of 8 AMG4681R-CWDMn Instruction Sheet document without notice. The information herein is believed to D18955-00.doc be accurate. No responsibility is assumed by AMG for its use.
- Page 8 This page is intentionally blank. AMG Systems Ltd. reserves the right to make changes to this Page 8 of 8 AMG4681R-CWDMn Instruction Sheet document without notice. The information herein is believed to D18955-00.doc be accurate. No responsibility is assumed by AMG for its use.
Need help?
Do you have a question about the AMG4681R-CWDMn and is the answer not in the manual?
Questions and answers