Toshiba MML-AP0074NH1-E Service Manual page 123

No. Part name
S
<Cautions at work>
PMV motor
Using spanners by 14mm,17mm and
19mm,
remove the PMV motor.
To avoid deformation of the pipes, do
not use a monkey wrench.
1) Perform work of item
2) Perform work of item
3) Remove the bundling band of PMV
motor lead wire.
4) Pull off butyl of PMV main unit until
the position shown in the right photo.
5) Using a spanner, remove PMV.
<Caution in reassembling>
Determine PMV motor lead wire
drawing-out position as same as that
before removing.
Return butyl rubber to the original
position.
m
Heat exchanger
(Refrigerant
cycle assembly)
n
Horizontal
louver
Procedure
1) Take off the pipe holder.
2) Remove screws for heat exchanger.
(4 pcs)
Open a horizontal louver outward and
stretch the arm of louver base same as
the direction in the picture.
Q
.
R
.
122
Remarks
Screws for heat
exchanger (4 pcs)