Adding Laundry; Cancelling The Pro- Gramme; Resuming The Programme When The Programme Status Is Rinse Hold; Unloading The Laundry - Bosch WAXH8G0LSN User Manual And Installation Instructions

en Basic operation
To resume the programme, after
3.
the desired soaking time, press
.
13.11 Adding laundry
Note: Please read the information in
the Safety → Page 4 and Preventing
material damage → Page 10 sections
to ensure that you use the appliance
safely.
Press .
1.
The appliance is paused and
checks whether it is possible to
add or remove laundry.
Add or remove laundry.
2.
Close the door.
3.
Press .
4.
13.12 Cancelling the pro-
gramme
Once the programme has started,
you can cancel it at any time.
Note: Please read the information in
the Safety → Page 4 and Preventing
material damage → Page 10 sections
to ensure that you use the appliance
safely.
Press .
1.
Open the door.
2.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
the Rinse programme.
– If the water level is high: Start
the Spin or Drain programme.
Remove the laundry.
3.
48
13.13 Resuming the pro-
gramme when the pro-
gramme status is Rinse
Hold
Set the Spin or Drain programme.
1.
Press .
2.
13.14 Unloading the laundry
Note: Please read the information in
the Safety → Page 4 and Preventing
material damage → Page 10 sections
to ensure that you use the appliance
safely.
Open the door.
1.
Remove the laundry.
2.
13.15 Switching off the appli-
ance
Press .
1.