Insert the maintenance flap and
6.
lock it into place.
1
Close the maintenance flap.
7.
17.6 Cleaning the intake
opening in the rubber
gasket
Regularly check the intake opening
in the rubber gasket for any block-
ages and clean the intake opening.
Open the door.
1.
Check the intake opening for
2.
blockages and remove any block-
ages.
Note: Do not use any sharp or poin-
ted objects.
17.7 Cleaning the water outlet
hose at the siphon
Switch off the appliance.
1.
2
Cleaning and servicing en
Disconnect the appliance's mains
2.
plug from the power supply.
Loosen the hose clamp and care-
3.
fully remove the water outlet hose.
Residual water may leak out.
Clean the water outlet hose and si-
4.
phon connecting piece.
Reattach the water outlet hose and
5.
secure the connection point using
the hose clamp.
59