Encore ENKVM-PS2 User Manual page 4

Auto Scan Interval
Sets the Auto Scan interval to "n" second intervals - where "n" is a number from 1 – 4.
[Left shift] [Right shift] [n]
Note: The "n" stands for the number of seconds that the focus dwells on a port before
switching to the other one. Replace the "n" with a number between 1 and 4 when
entering this hotkey combination. (See the table, below.)
Scan Interval Table
n
1
2
3
4
Secs.
3 secs. (Default)
5 secs.
10 secs.
20 secs.
3