Dial Mode; Auto Clock - Philips D161 Extended User Documentation

2
Select [SERVICES] > [RECALL TIME],
then press MENU/OK
3
Select an option, then press MENU/OK to
»

Dial mode

Note
•
This feature only applies to models that support both
tone and pulse dial.
for detailed information.
Set the dial mode
1
MENU/OK.
2
Select [SERVICES] > [DIAL MODE], then
press MENU/OK
3
Select a dial mode, then press MENU/OK
»
Note
•
If your phone is in pulse dial mode, press

Auto clock

Note
•
This service is network dependent.
•
Make sure you have subscribed to the caller ID service
before you use this feature.
phone with the public switched telephone
28 EN
set.
1
MENU/OK.
2
Select [SERVICES] > [AUTO CLOCK],
then press MENU/OK
3
Select [ON]/[OFF], then press MENU/OK.
»
Register additional handsets
handsets.
1
•
status, press MENU/OK.
• If the handset is in [SEARCHING] and
[UNAVAILABLE] status, press MENU/
OK > [SERVICES] > [REGISTER] >
MENU/OK.
2
10 seconds.
Note
•
3
make corrections. Then press MENU/OK
»
a handset number to the handset.
on the base station for
REDIAL/C to