Table of Contents
Advertisement
» The setting is saved.
Dial mode
Note
•
This feature only applies to models that support both
tone and pulse dial.
Dial mode is the telephone signal used in your
country. The phone supports tone (DTMF) and
pulse (rotary) dial. Consult the service provider
for detailed information.
Set the dial mode
1
Press MENU/OK.Select [Services] > [Dial
mode], then press MENU/OK to confirm.
2
Select a dial mode, then press MENU/OK
to confirm.
» The setting is saved.
Note
•
If your phone is in pulse dial mode, press * during a call
for temporary tone mode. Digits entered for this call
are then sent out as tone signals.
Auto clock
Note
•
This service is network dependent.
•
Make sure you have subscribed to the caller ID service
before you use this feature.
It synchronizes the date and time on your
phone with the public switched telephone
network (PSTN) automatically. For the date to
be synchronized, make sure the current year is
set.
1
Press MENU/OK.
2
Select [Services] > [Auto clock], then
press MENU/OK to confirm.
3
Select [On]/[Off] . Press MENU/OK.
» The setting is saved.
Restore default settings
You can reset your phone settings to the
original factory settings.
1
Press MENU/OK.
2
Select [Services] > [Reset], then press
MENU/OK to confirm.
» A confirmation request is displayed.
3
Press MENU/OK to confirm.
» All settings (except the phonebook)
are reset.
EN
Page 19
Hide quick links:
Advertisement
Table of Contents
