3 Get started
Caution
•
Make sure that you have read the safety instructions in
the 'Important safety instructions' section before you
connect and install your handset.
Connect the base station
Warning
•
or the underside of the phone.
•
batteries.
Note
•
noise and caller ID problems caused by the DSL
contact your DSL service provider.
•
The type plate is located on the bottom of the base
station.
1
Connect each end of the power adapter
•
the DC input jack at the bottom of the
base station;
•
the power socket on the wall.
2
•
the telephone socket at the bottom of
the base station;
•
the telephone socket on the wall.
3
Connect each end of the power adapter
•
the DC input jack at the bottom of the
•
the power socket on the wall.
EN
7