Toto TCF802 Series Instruction Manual page 17

Maintenance
Gap between the Main Unit and Bowl Unit
You can remove the main unit to clean
the top of the bowl unit and the bottom of
the main unit.
1
Remove the cover on the left side
switch to "OFF".
(Page 28)
Remove the main unit.
2
(1) Pull the main unit toward you while pressing the "Main unit removal button".
Top of the bowl unit Base plate
Bolt
Attention!
Do not pull the unit with undue force.
(because the water supply hose and power cord are attached.)
(2) Lift up the main unit.
Attention!
Do not excessively bend the
water supply hose.
3 Clean the top of the bowl unit and the bottom of the main unit.
Wipe with a soft cloth soaked in a diluted, neutral kitchen detergent. Then, wipe it with a soft cloth soaked in
water so that no detergent remains.
32
Gap between the Main Unit and Bowl Unit
(Approximately once a month)
Soft cloth soaked in water Toilet paper, etc. (May cause damage.)
If the power switch is not turned "OFF", the
unit may malfunction or cause a failure or
electric shock.
Main unit
removal button
Gap between the Main Unit and Bowl Unit
4
Mount the main unit.
(1) Lift the main unit, then lower it straight down while
threading the power cord and water supply hose into the
recess on the bowl unit.
Attention!
Be careful not to pinch the power cord.
Do not excessively bend the water supply hose.
(2) Align the main unit with the center of the
base plate until a click sound is heard.
CAUTION
base plate until a click sound is
heard.
(Failure to do so could cause the main
unit to come loose and fall resulting in
injury.)
After mounting, check that the main unit does
not detach even when pulled.
5 Flip the power switch to ON.
The "Power" LED lights up.
Reinstall the cover.
(Page 29)
(Approximately once a month) (Continued)
Base plate
Click
(Page 28)
33