Using The On-Screen Display (Osd) Controls - Lenovo L24i-30 User Manual

Using the On-Screen Display (OSD) controls

To adjust the settings, the user controls can be viewed through the OSD.
Input Signal: VGA
To use the controls:
1. Press to open the main OSD menu.
2. Use or
there is a sub-menu, you can move between options using
that function. Use
3. Press to move backwards through the sub-menus and exit from the OSD.
4. Press and hold
to the OSD. Press and hold
the OSD.
5. Enables DDC/CI by default. Use OSD Exit Key, Press and hold
disable / enable DDC/CI function. The words "DDC/CI disable" shows on the screen.
L24i-30
Brightness
Contrast
DCR
Display Mode
Scaling Mode
Over Drive
to move among the icons. Select an icon and press
or to make adjustments. Press
for 10 seconds to lock the OSD. This will prevent accidental adjustments
for 10 seconds to unlock the OSD and allow adjustments to
1920x1080
100
75
0
to access that function. If
or , then press to select
to save.
for 10 seconds to
Chapter 2.
2-4