Connect The Battery - DuroStar DS5000X User Manual

GENERATOR SETUP (CONTINUED)
Step 3 - Connect the Battery
22
1.
Disconnected on arrival
The generator battery is disconnected on arrival to prevent
discharge or accidental starting in storage and transportation.
2.
Locate the negative cable
a. Locate the negative battery cable above and behind
the battery. One side is connected to ground and
the other end needs to be connected to the battery.
b. Route the free end to the negative battery terminal.
3.
Connect the negative cable
a. Push the black rubber boot up the wire to eDSose
the connector.
b. Securely connect the free end of the battery cable
to the negative battery terminal using the screw
and nut from the battery with the screwdriver and
wrench from the toolkit.
4.
Cover the terminal
a. Cover the connected terminal with the black rubber
boot.